HealthCareEquipment.org


Status: In Stock

StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis


A Orthopedic Devices Related Image

(Not Necessarily related to the device)

Description:

StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis - Biomet Inc.

Biomet Inc.'s StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis is a premium quality healthcare device designed to tackle the complexities associated with knee replacement procedures. This medical innovation enables surgeons to fabricate an accurate, customized temporary knee prosthesis for patients during intricate joint replacement surgeries.

This medical device serves as a critical surgical tool for creating a cement spacer, acting as a temporary placeholder implant designed to maintain the space between the joint until the final prosthesis can be inserted. The use of the StageOne Disposable Cement Spacer Molds assists in controlling and treating infection, a common complication within joint replacement procedures, by enabling the incorporation of high-dose, local antibiotics into the temporary spacer.

The primary benefits of the StageOne Disposable Cement Spacer Molds are characterized by their effectiveness and safety. Its design ensures accurate restoration of joint alignment, helping maintain the patient's mobility during the interim period. Additionally, it facilitates the delivery of a high concentration of antibiotics directly to the infected area, reducing the risk of systemic toxicity.

The product's disposable nature ensures cleanliness and sterility, further preventing contamination or infection. By offering significant improvement in the procedure, Biomet Inc. underscores their continued commitment towards enhancing patient care and safety.


Primary Use:

Primary Medical Use of StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis

First and foremost, let's confidently understand the core purpose of the StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis. This medical device falls under the category of Joint Implants and is integral to addressing specific orthopedic conditions.
The primary medical use of these molds is to facilitate two-stage revision arthroplasty for the treatment of deep joint infections, more specifically within the knee. These infections, if not addressed, can lead to disastrous health outcomes for patients, including severe discomfort and mobility loss.
Two-stage revision arthroplasty is an invasive procedure that takes place over two surgeries. The temporary knee prosthesis created using StageOne Disposable Cement Spacer Molds is utilized between these surgeries, effectively serving as a placeholder.
The spacer mold aids in the following ways:
• By providing temporary joint mobility and stability to patients, enhancing their comfort after the first surgery, and during the interim period leading to the second phase of surgery.
• Delivering high doses of antibiotics directly to the infection site. As a result, the mold aids local delivery of antibiotics to the infected area while also maintaining joint space and soft tissue tension.
In summary, StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis are a crucial piece of medical equipment used to optimize patient outcomes in the complex journey of two-stage revision arthroplasty for the knee.


How It Works:

Introduction to StageOne Disposable Cement Spacer Molds for Temporary Knee Prothesis

The StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis represents a highly technical and efficient device in the category of Joint Implants. Used during two-stage revision arthroplasty, this apparatus plays a critical role in facilitating the successful elimination of periprosthetic joint infections and the ultimate replacement of affected joints.

Functionality and Operation

The functionality of the StageOne Disposable Cement Spacer Molds revolves around its primary objective: the creation of a temporary prosthesis during the interim period of joint infection treatment and final joint replacement.

Step 1: Preparation of Antibiotic-Impregnated Cement

The first step involves the preparation of antibiotic-impregnated cement. The surgeon typically uses a commercially available antibiotic cement or manually mixes the desired combination of antibiotics with cement.

Step 2: Molding of Cement Spacer

Next, the antibiotic-impregnated cement is inserted into the StageOne Disposable Cement Spacer Mold. This mold gives an anatomically correct shape to the cement spacer, thereby ensuring precise alignment and optimal joint stability during the interim period.

Step 3: Insertion of the Spacer

The cement spacer is inserted into the knee joint once the original prosthesis is removed and the joint infection has been debrided. This spacer not only maintains the correct joint space but also allows functional limb movement and mobility while continuously delivering high local concentrations of antibiotics to eradicate the infection.

Step 4: Replacement with Permanent Joint Prosthesis

After the infection has been fully treated, typically in six to eight weeks, the temporary cement spacer is removed. Subsequently, the surgeon inserts the permanent knee joint prosthesis into the joint space. In summary, the StageOne Disposable Cement Spacer Molds for Temporary Knee Prosthesis offers a systematic and efficient solution during two-stage revision surgeries. By precisely delivering targeted antibiotic therapy and maintaining appropriate knee joint alignment, these molds contribute significantly to improving patient outcomes and enhancing the quality of life for the affected individuals, thereby enhancing the healthcare services we provide as responsible medical professionals.

Manufacturer:

Biomet Inc.


Status: In Stock


Are you the owner or manufacturer of this device? Need to update anything on this page or get in touch with us? Click here.

×

Owner/Manufacturer Registration

Thank you for your submission!

We will get in touch with you shortly.